[IBM] x3650 M4 Setting BIOS Parameters for Performance

step01. press ‘F1‘ enter UEFI/BIOS

step02. choice ‘System Settings

step03. choice ‘Operating Modes

Choose Operating Mode <Custom Mode>
Memory Speed <Max Performance>
Memory Power Management <Disabled>
Proc Performance States <Disabled>
C1 Enhanced Mode <Disabled>
QPI Link Frequency <Max Performance>
Turbo Mode <Enable>
CPU C-States <Disable>
Power/Performance Bias <Platform Controlled>
Platform Controlled Type <Maximum Performance>

圖片.png

step04. choice ‘Power’
Active Energy Manager < Capping Disabled>
Workload Configuration < I/O sensitive>

圖片.png

PS:

  • Active Energy Manager

    Select this choice to enable or disable Active Energy Manager Power Capping. If you enable Power Capping, the Active Energy Manager program will limit the maximum power that is consumed by the server.

  • Workload Configuration

    Select this choice to determine how to balance between I/O bandwidth and balanced workload. Choosing I/O sensitive will get higher I/O bandwidth when expansion cards are used. Choosing Balanced will allow enough frequency for the workload while the microprocessor cores are idle.

 

發表迴響

在下方填入你的資料或按右方圖示以社群網站登入:

WordPress.com 標誌

您的留言將使用 WordPress.com 帳號。 登出 /  變更 )

Google photo

您的留言將使用 Google 帳號。 登出 /  變更 )

Twitter picture

您的留言將使用 Twitter 帳號。 登出 /  變更 )

Facebook照片

您的留言將使用 Facebook 帳號。 登出 /  變更 )

連結到 %s