[NetApp] 7-mode disable SMB 1.0

Beginning with Data ONTAP 8.2.5, you can disable the storage system’s SMB 1.0 server and client capabilities, if desired. It is enabled by default.

cifs control set smb1.enable off  // Server capability

cifs control set smb1.client.enable off // Client capability

 

Reference : NetApp Disable or Reenable SMB 1.0 // http://nt-ap.com/2qkRu5l

 

 

 

[NAS] Asustor AS-304T with FT-1000BS UPS lost-power call PC shutdown

# 2016-10-25 draft

因入手了FT-1000BS接上NAS就是為了怕斷電,但保護了NAS…..那誰來可以叫PC關機呢?

很簡單按照Asustor 官網說的 方式由NAS當UPS master,其它的PC則為slave角色.

solution :

step01. download WinNUT ( WinNUT-2.0.0.4a-Installer.exe )

step02. install WinNUT-2.0.0.4a-Installer.exe

step03. perform ‘ WinNUT Configuration Tool’

step04. 在Configuration File Path 處,點選 [Edit]

step05. MONITOR asustor@IP-address 1 admin 1111 slave // 此一資訊可以 ssh nas check > /usr/etc.base/ups/upsd.users

step06. Apply and Start WinNUT

step07. 在LogFile Path 處,點選 [view]

done.


Reference:

1. https://support.asustor.com/index.php?/Knowledgebase/Article/View/62/34/ups-client-slave

2. http://www.est.idv.tw/?p=198

[Storage] HDS HUS130 Failed to create the volume. alert “DMED270010…."

HUS130在建立新的volume時發生了告警錯誤訊息如下

Failed to create the volume.
DMED270010: The process cannot be performed because the capacity of DP pool is insufficient or over the depletion alert value
of DP pool consumed capacity alert. Please grow the capacity of DP pool or change the depletion alert value of DP pool consumed capacity alert,

and try again.

Solution :
**在HSNM2操作**

1.HUS130_xxxxxxxx > Groups > Volumes 
2.點擊DP pool裡頭 “000″二下進去 // HUS130_xxxxxxxx > Groups > Volumes > DP Pool-000
3.右上有個" Edit Pool Attribute “點進去
4.修改 DP Pool Consumed Capacity
    4-1. Early Alert Threshold:改為98

    4-2. Depletion Alert Threshold改為99

Done.YOY