[HDS] How to manual force restore PN & SN

~ Applicable situation: SVP restore server blade settings (EFI/BMC)~

step01. SSH SVP (Chassis Management Module)

step02. use maintenance account / password > ceconsl / cepasswd

step03. (restore original PM & SN ,need remember information)
# set blade fru data [blade-locate] -pm [Product-Model] sn [Serial Number]
(sample)
# set blade fru data 5 -pm GG-XXXXXXXXXXX-X -sn 978GG-XXXXXXXXXXX-X-X0000XXXX

step04. 查看第五刀FRU資訊
# show blade fru data 5

step05. 重啟BMC套用新的PM & SN
# bmc-reset blade 5 -h

step06.登入SVP或HCSM作Refresh blade / chassis查看資訊是否寫入正確

step07.重新載入LP License (副檔名.tsv) ; 前提機器需關機才能註冊
登入SVP > System > LP License > Register
(PS: 若還是有問題請再次檢查 PM & SN是否和原先資訊有無出入;

若正確那只能用放大絕 >
SVP use “ceconsl" account login >點擊Blade > (右邊) Action > Restore Server Blade Settings > “Choice FRU restore" ,再重啟BMC , 最後再重新註冊LP License)